Menu

Matte

Product Table / Data Sheet

Type Description Standard Thickness* (µ) USP Application PDF
N2 -MT One Side Matte Other Side Glossy Both Side Corona Treated 12 TO 25 µ
  • Excellent Matte Appearance
  • Excellent Contact Clarity
  • Very Good Slip and Antistatic Properties
  • Matte Side is Specially Design for Very Good Anchoring of UV Curable Inks and Coatings
  • Excellent Anchorage of Lamination Adhesive on Treated Glossy Side
  • Excellent Machinability
  • Suitable for Various Lamination Machines
Lamination of Printed Paper Boards / Posters / Book Covers Etc. Where Excellent Matte Appearance is required  

THERMAL GLOSS FINISH BOPP FILM

Application:

Lamination of Printed Paper Boards / Posters / Book Covers Etc. Where Excellent Matte Appearance is required

Description:

One Side Matte Other Side Glossy Both Side Corona Treated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
N2 -MT
One Side Matte Other Side Glossy Both Side Corona Treated
Lamination of Printed Paper Boards / Posters / Book Covers Etc. Where Excellent Matte Appearance is required One Side Matte, Other Side Glossy, Both Side Corona Treated OPP Film with excellent contact clarity, slip and antistatic properties for use in Paper / Paper Board Lamination Application. Matte side is specifically designed for very high anchorage of radiation curable printing (UV / IR Curable Printing), which is done as a post lamination process on requirements. Glossy side is also designed for very high anchorage of various lamination adhesives. Lamination always has to be carried out on glossy side.