Menu

Flexible Packaging

  • Home
  • Applications / Flexible Packaging

BOPP and BOPET Films are extensively used for flexible packaging to ensure good appeal, product protection and extended shelf life. Common examples of flexible packaging are various single or multilayer packaging structures like pouches and bags.

Type Description Standard Thickness* (µ) USP Application PDF

METALLIZED FILMS

Application:

Suitable for flexible packaging application, especially for higher gloss and barrier properties.

Description:

Normal density metallization on plain side and other side plain

Salient Features:

  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, especially for high barrier properties.

Description:

High density metallization on plain surface with plasma treatment and other side plain.

Salient Features:

  • High Density
  • Standard Metal Bond Strength
  • High Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, especially for higher gloss and barrier properties.

Description:

Normal density metallization on Corona side and other side plain

Salient Features:

  • Standard Density
  • Improved Metal Bond Strength
  • Standard Water Vapor and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, especially for higher gloss and barrier properties.

Description:

Normal density Metallized on plain surface and other side corona treated

Salient Features:

  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapor and Gas Barrier properties
  • Good for Printing and Lamination
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, especially for higher gloss and barrier properties.

Description:

High density Metallization on corona surface and other side plain

Salient Features:

  • Average Density
  • Standard Metal Bond Strength
  • Moderate Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where high barrier is required

Description:

High density Metallised on plain surface with plasma and other side corona treated.

Salient Features:

  • Average Density
  • Standard Metal Bond Strength
  • Moderate Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, especially for high barrier properties requirement

Description:

High density Metallization on corona surface and other side plain

Salient Features:

  • High Density
  • Standard Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where good barrier and high metal bond is required, film is not recommended for liquid / sterilization application

Description:

Normal density metallization on pre-coated co polyester side and other side plain

Salient Features:

  • Standard Density
  • Good Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where high barrier and high metal bond is required

Description:

High density metallization on pre-coated co polyester side and other side plain

Salient Features:

  • High Density
  • Good Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where high barrier and high metal bond is required

Description:

Normal density Metallised on pre-coated co polyester surface and other side corona treated.

Salient Features:

  • Standard Density
  • Good Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Corona side good for Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where high barrier and high metal bond is required

Description:

High density Metallized on pre-coated co polyester surface and other side corona treated

Salient Features:

  • High Density
  • Good Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Corona side Good for Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where high barrier and high metal bond is required

Description:

Ultra high density metallization on pre-coated co polyester side and other side corona

Salient Features:

  • High Density
  • Good Metal Bond Strength
  • Excellent Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, chemical treated side is suitable for printing

Description:

Normal density Metallised on plain surface and other side chemically pre-treated

Salient Features:

  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for Printing and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, chemical treated side is suitable for printing.

Description:

High density Metallised on plain surface and other side chemically pre-treated

Salient Features:

  • High Density
  • Standard Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Good for printing and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, chemical treated side is suitable for printing

Description:

Normal density Metallised on corona surface and other side chemically pre-treated.

Salient Features:

  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for Printing and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, chemical treated side is suitable for printing

Description:

High density Metallised on corona surface and other side chemically pre-treated.

Salient Features:

  • High Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for printing and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, chemical treated side is good for surface printing with UV curable inks.

Description:

Normal density Metallised on plain surface with Plasma and other side chemically pre-treated.

Salient Features:

  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for Printing with UV Curable Ink and Standard Lamination Bond Strength

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application, Chemical treated side is good for surface printing with UV curable inks.

Description:

Normal density Metallized on Corona surface and other side Chemically Pre-treated.

Salient Features:

  • Standard Density
  • Improved Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for printing with UV curable ink and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where good barrier and high metal bond is required, film is recommended for liquid packaging application

Description:

Normal density Metallised on pre-coated chemical surface and other side plain.

Salient Features:

  • Standard Density
  • High Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where good barrier and high metal bond is required. Film is suitable for hot fill application also.

Description:

Normal density Metallised on pre-coated chemical surface and other side corona

Salient Features:

  • Standard Density
  • High Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where good barrier and high metal bond is required. Film is suitable for hot fill application also.

Description:

High densityx Metallized on pre-coated co polyester Surface and other side corona treated.

Salient Features:

  • High Density
  • High Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where good barrier and high metal bond is required. Film is suitable for hot fill application also.

Description:

High density Metallized on pre-coated co polyester Surface and other side corona treated

Salient Features:

  • High Density
  • High Metal Bond Strength
  • very Good Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where high metal bond is required. Film is suitable for hot fill applications

Description:

Normal density Metallization on chemical coated surface offer high metal adhesion performance.

Salient Features:

  • Standard Density
  • High Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Excellent Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging application where high barrier and high metal bond is required. Film is suitable for hot fill applications.

Description:

High density Metallisation on pre-coated chemical surface and other side Non treated

Salient Features:

  • High Density
  • Excellent Metal Bond Strength
  • Excellent Water Vapour and Gas Barrier properties
  • Excellent Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging, glitter powder application, especially for higher gloss

Description:

Normal density Metallised on plain surface and other side plain.

Salient Features:

  • Standard Density
  • Standard Metal Bond Strength
  • High Gloss
  • Standard Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Suitable for flexible packaging, glitter powder application, especially for higher gloss

Description:

Normal density Metallised on plain surface and other side plain.

Salient Features:

  • Standard Density
  • Standard Metal Bond Strength
  • Standard Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

labels and other industrial application.

Description:

Normal density metallised direct matte polyester film with medium surface gloss.

Salient Features:

  • Standard density
  • Medium surface gloss
  • Good dimensional / thermal stability.
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

labels and other industrial application.

Description:

Normal density Metallisation on translucent direct matte polyester film and other side corona treated

Salient Features:

  • Standard Density
  • Excellent Dimensional / Thermal Stability.
  • Excellent Machinability
  • Suitable for Printing

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

labels and other industrial application.

Description:

Normal density Metallised direct matte one side metallised and other side chemically coated.

Salient Features:

  • Standard Density
  • Good Dimensional / Thermal Stability.
  • Excellent Machinability
  • Suitable for Printing & Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Heat Sealable Metallised Film for Single / Two Ply Packaging Structure

Description:

One Side Metallised, Other Side Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure. The film exhibits excellent water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The untreated heatsealable side exhibits excellent hot-tack and seal strength

Salient Features:

  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Low SIT Heat Sealable Metallised Film for Single / Two Ply Packaging Structure for High Speed Packaging Application.

Description:

One Side Metallised, Other Side Low SIT Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure for High Speed Packaging Machines. The film exhibits excellent water vapour and gas barrier properties. During metal isation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives.The untreated low SIT heat sealable side exhibits excellent hot-tack and seal strength.

Salient Features:

  • Low SIT Heat Sealable Skin with Excellent Hot-tack and Seal Strength
  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Ultra Low SIT Heat Sealable Metallised Film for Single / Two Ply Packaging Structure for Very High Speed Packaging Applications

Description:

One Side Metallised, Other Side Ultra Low SIT Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure for High Speed Packaging Machines. The film exhibits excellent water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The untreated ultra low SIT heat sealable side exhibits excel ent hot-tack and seal strength.

Salient Features:

  • Ultra Low SIT Heat Sealable Skin with Excellent Hot-tack and Seal Strength
  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Lamination with Paper / Paper Board for Various Applications like Disposable Paper Plates, File Covers, Leaflats Etc. • Gift Wrapping Applications • Other Decorative Applications

Description:

One Side Metallised, Other Side Non Heat Sealable OPP Film for use in Lamination with Paper / Paper Board, Gift Wrapping and Decorative Application. The film exhibits excellent water vapour and gas barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with Inks during printing.

Salient Features:

  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Inks on Metallised Side
  • Very Good Metal Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Non Heat Sealable Metallised Film for Sandwich Layer in Three Ply Laminate Packaging Structure.

Description:

One Side Metallised, Other Side Corona Treated Non Heat Sealable OPP Film for use as Sandwich Layer in Three Ply Laminate Packaging Structure. The film exhibits excel ent water vapour and gas barrier properties. During metal isation process film is treated with plasma for enhancing metal adhesion and barrier properties. Metal ised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The corona treated non heat sealable side is also designed for excellent anchoring to lamination adhesive.

Salient Features:

  • Excellent Surface Gloss on Metallised Side
  • Excellent Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side as wel as Corona Treated Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

Heat Sealable Matt Metallised Film For High Speed Packaging Application.

Description:

One Side Matt Metallised, Other Side Heat Sealable OPP Film is excellent water vapour and gas barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The untreated heat sealable side exhibits excellent hot-tack and seal strength.

Salient Features:

  • Designed to give Rich Matt finish appearance after Metallization
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Aluminium on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
  • Very Good Hot-Tack and Seal Strength

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

White Cavitated Heat Sealable Metallised Film for Single / Two Ply Printing Lamination Application (For Ice Cream Packaging, Labels, High Value Food Packaging Etc.)

Description:

High Barrier White Cavitated One Side Metallised, Other Side Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure. The film exhibits high water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. For better anchorage of inks & lamination adhesives, a primer or corona booster may be applied on metallised side before conversion. The untreated heat sealable side exhibits excellent hot-tack and seal strength.

Salient Features:

  • Very High Water Vapour and Gas Barrier Properties
  • Excellent Opacity
  • One Side Brilliant Pearlescent White Appearance and Other Side Brilliant Metallic Lustre
  • Very High Surface Gloss
  • Low Seal Initiation Temperature
  • Excellent Hot Tack and Heat Seal Strength
  • For better anchorage of inks & lamination adhesives, a primer or corona booster may be applied on metallised side before conversion
  • Excellent Machinability
  • Suitable for Various Printing / Lamination Machines

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

White Cavitated Heat Sealable Metallised Film For Wrap Around and Pressure Sensitive Label Application

Description:

White Cavitated One Side Metallised, Other Side treated OPP Film for use in Single / Two Ply Packaging Structure. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. For better nchorage of inks & lamination adhesives, a primer or corona booster is recommended to be applied on metallised side before conversion. Non metallised side is treated and exhibits low Coefficient of friction specifically designed for high speed packaging & wrap around labelling application.

Salient Features:

  • High Water Vapour and Gas Barrier Properties
  • Non metallised side is treated and exhibits low C.O.F.; facilitates Labelling and high speed packaging
  • One Side Brilliant Pearlescent White Appearance and Other Side Brilliant Metallic Lustre
  • For better anchorage of inks & lamination adhesives, a primer or corona booster is recommended to be applied on metallised side before conversion
  • Excellent Stiffness facilitated good Machinability

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

High Barrier White Cavitated Heat Sealable Metallise Ed Film For Single / Two Ply Printing Lamination Application ( for Ice Cream Packaging, Labels, High Value Food Packaging Etc).

Description:

High Barrier White Cavitated One Side Metallised, Other Side Heat Sealable OPP Film for use in Single /Two Ply Packaging Structure. The film exhibits very high water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with Inks and lamination adhesives. The untreated heat sealable side exhibits excellent hot-tack and seal strength.

Salient Features:

  • Very High Water Vapour and Gas Barrier Properties
  • Excellent Opacity
  • One Side Brilliant Pearlicent White Appearance and Other Side Brilliant Metallic Lustre
  • Very High Surface Gloss
  • Low Seal Initiation Temperature
  • Excellent Hot Tack and Heat Seal Strength
  • Excellent Surface Treatment Retention on Metallised Side
  • Excellent Anchorage of Inks and Lamination Adhesive on Metallised Side
  • Excellent Machinability
  • Suitable for Various Printing / Lamination Machines

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

High Barrier Heat Sealable Metallised Film for Single / Two Ply Packaging Structure

Description:

High Barrier, One Side Metallized, Other Side Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure. The film exhibits very high water vapor and gas barrier properties. During metallization process film is treated with plasma for improving metal adhesion and barrier properties. Metallized side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. Untreated heat sealable side exhibits excellent hot-tack and seal strength.

Salient Features:

  • Very High Water Vapour and Gas Barrier Properties
  • Excellent Surface Gloss on Metallised Side
  • Excellent Adhesion of Aluminium on Treated Side
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

METALLIZED FILMS

Application:

High Heat Seal Strength Sealable Metallised Film for Single / Two Ply Packaging Structure. Potential Replacement of Metallised CPP in few Structures.

Description:

One Side Metallised, Other Side High Heat Seal Strength Sealable OPP Film for Use in Single / Two Ply Packaging Structure. Speciality of this Film is Very High Sealing Strength and Outstanding Hot Tack Properties. Due to the Excellent Sealing Characteristics, this film can be considered as potential Replacement of Metallised CPP in Two Ply Laminating Structure. Also, this film exhibits excellent water vapour and gas barrier properties compare to Metallised CPP. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives.

Salient Features:

  • Very High Sealing Strength and Outstanding Hot Tack Properties
  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

CPP Films

Application:

• Base film for metallization, • Surface Printable after metallization.

Description:

It is a co-extruded Transparent, one side Heat Sealable, other Side Corona Treated for Metallization, Cast Polypropylene (CPP) Film.

Salient Features:

  • Excellent Machinability
  • Excellent Sealing strength
  • Superior metal anchorage

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

CPP Films

Application:

• Lamination and single ply applications, Jumbo packs (e.g. snack food, diapers, etc.), Direct food packaging (e.g. bread and bakery products, etc.),

Description:

It is a co-extruded Transparent, One side Heat Sealable, Other Side Corona Treated Cast Polypropylene (CPP) Film.

Salient Features:

  • Low COF for High Speed packaging line
  • Good Optical properties
  • Treated Surface is receptive to Inks and adhesives
  • Good hot tack

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

CPP Films

Application:

• Base film for metallization, • Surface Printable after metallization.

Description:

It is a co-extruded Transparent, one side Heat Sealable, other Side Corona Treated for Metallization, Cast Polypropylene (CPP) Film.

Salient Features:

  • Excellent Machinability
  • Excellent Sealing Strength
  • Superior Metal Anchorage

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

COATED FILMS

Application:

For see through packaging application. The film is suitable for pasteurization application without losing its barrier properties and transparency.

Description:

One side PVdC coated transparent polyester packaging film. The film is printable on coated side and can be sealed coating to coating side. It has excellent moisture, oxygen and aroma barrier.

Salient Features:

  • Resistance to pasteurization
  • Excellent water, gas and aroma barrier
  • High transparency
  • Excellent dimensional stability
  • PVdC can be easily laminated with other substrates
  • Very good compatibility with NC, PVB inks
  • Suitable for flexo and gravure printing

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

COATED FILMS

Application:

For see through packaging application. The film is suitable for non-pasteurization application.

Description:

One side PVdC coated transparent polyester packaging film. The film is printable on coated side and can be sealed coating to coating. It has excellent moisture, oxygen and aroma barrier.

Salient Features:

  • Non-pasteurizable grade
  • Excellent water, gas and aroma barrier
  • High transparency
  • Excellent dimensional stability
  • PVdC can be easily laminated with other substrates
  • Very good compatibility with NC, PVB inks
  • Suitable for flexo and gravure printing
  • Solvent free coating

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

COATED FILMS

Application:

For see through packaging application.

Description:

Transparent one side acrylic coated other side high barrier PVdC coated OPP film with excellent clarity, slip and antistatic properties. The film exhibits excellent gas, moisture and aroma barrier properties and excellent seal integrity on both the coated surface.

Salient Features:

  • Excellent water, gas and aroma barrier
  • Excellent seal strength and hotack
  • Excelent clarity and gloss
  • Excellent dimensional stability
  • PVdC can be easily laminated with other substrates
  • Very good compatibility with NC, PVB inks
  • Suitable for flexo and gravure printing
  • Solvent free coating

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

COATED FILMS

Application:

For see through packaging and wrapping application.

Description:

Transparent both side acrylic coated film with excellent clarity, slip and antistatic properties. The film exhibits excellent moisture and aroma barrier properties and excellent seal integrity on both coated surface with

Salient Features:

  • Excellent water and aroma barrier
  • Excellent seal strength and hotack
  • Broad heat seal range
  • Excelent clarity and gloss
  • Excellent dimensional stability
  • Ideal support for water based ink printing
  • Suitable for flexo and gravure printing
  • Solvent free coating

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Packaging, Printing, Lamination and Metallization.

Description:

Untreated Plain Bi-Axially Oriented Polyester Film

Salient Features:

  • Good Clarity
  • Good Adhesion to Inks
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Excellent for Printing and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Packaging, Printing, Lamination and Metallization.

Description:

High Mechanical, Optical & Thermal characteristics with Improved Ink / Metal Adhesion characteristics.

Salient Features:

  • Good Clarity
  • Improved Adhesion Properties
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Excellent for Printing and Metallization

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Packaging, Printing, Lamination and Metallization.

Description:

High Mechanical, Optical & Thermal characteristics with Improved Ink / Metal Adhesion characteristics.

Salient Features:

  • Good Clarity
  • Improved Adhesion Properties
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Excellent for Metallization

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Packaging, Printing, Lamination and Metallization.

Description:

Untreated plain Bi-axially Oriented Polyester Film

Salient Features:

  • Excellent Clarity
  • Excellent Machinability
  • Excellent Mechanical and thermal Properties
  • Excellent for Lamination and Metallization

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Suitable for lamination and Metallization.

Description:

Untreated Rough Surface Bi-axially Oriented Polyester Film

Salient Features:

  • Intermediate Haze
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Excellent for Lamination and Metallization

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Printing, Lamination, Packaging and Metallization

Description:

One side Co-Polyester Coated bi-axially Oriented Polyester film

Salient Features:

  • Excellent Adhesion of Inks and Adhesive
  • Significant Improved Metal Adhesion when Metallized on Coated Side
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Printing, Lamination, Packaging and Metallization

Description:

One side Co-Polyester Treated & Other side Corona Treated bi-axially Oriented Polyester Film

Salient Features:

  • Excellent Adhesion of Inks and Adhesive on Coated Side
  • Improved Adhesion Properties on Corona Treated Side
  • Significant Improved Metal Adhesion when Metallized on Treated side
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Printing, Lamination & Packaging.

Description:

One side Chemically treated bi-axially oriented polyester film

Salient Features:

  • Good Adhesion to Solvent base Inks and Coatings
  • Good Clarity for Reverse Printing
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Excellent for Printing and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Printing, Lamination,& Packaging.

Description:

One side chemically treated & other side corona treated bi-axially oriented polyester film

Salient Features:

  • Good Adhesion to Solvent base Inks and Coatings
  • Good Clarity for Reverse Printing on Coating Side
  • Improved Adhesion Properties on Corona Treated Side
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Excellent for Printing and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Description:

One side chemically treated bi-axially oriented polyester film

Salient Features:

  • Excellent Adhesion to Solvent base Inks and Coatings Specialy for UV Ink
  • Good Clarity for Reverse Printing
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Excellent for Printing and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Good for surface printing with UV curable inks, Lamination & Packaging

Description:

One side chemically treated bi-axially oriented polyester film

Salient Features:

  • Excellent Adhesion to Solvent base Inks and Coatings Specialy for UV Ink
  • High Clarity for Reverse Printing
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Excellent for Printing and Lamination

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Boilable / Retort Application, Printing, Lamination & Metallization

Description:

One side chemically treated bi-axially oriented polyester film

Salient Features:

  • Good Clarity
  • For Boilable / Retort Application
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Excellent for Printing and Coating

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level

PET FILMS

Application:

Boilable / Retort Application, Printing, Lamination & Metallization.

Description:

One side chemically treated & other side corona bi-axially oriented polyester film

Salient Features:

  • For Boilable / Retort Application
  • Good Clarity
  • Improved Adhesion Properties on Corona Treated Side
  • Excellent Machinability
  • Excellent Mechanical and Thermal Properties
  • Improved Adhesion Properties on Corona Treated Side
  • Excellent for Printing and Coating

Technical Data

The values provided in the Technical Data Sheet are typical performance data and are believed to be accurate. These are given in good faith, but users are advised to conduct their own tests on representative samples and not on the actual product dispatched. JINDAL POLY FILMS LIMITED doesn’t guarantee or warranty typical values and fitness for its use for a specific purpose. The user is solely responsible for all determinations by the application of this information or the safety and suitability of our products, either alone or in combination with other products.

Storage & Handling:
It is a fact that dyne level decays over time in BOPP films and the decay is further aggravated with extreme environmental conditions. If film rolls are to be stored for a long time, it is preferable to maintain a constant, preferably low temperature (below 30°C) and a low humidity (below 70% RH) to maximize shelf life of the product & to minimize dyne level